product

 Home » Products » Switching power supply » Dr-240-24 DIN Rail Series 240W 24V Output Switching Power Supply

Dr-240-24 DIN Rail Series 240W 24V Output Switching Power Supply

1.Power tools series:Electric saw,Drilling machine,Ginder,Sand blast Machine,Puching Machine,Weeding Machine,Air Compressor etc.
2.Office series:Computer,Printer,LCD Monitor,Scanning Machine etc.
3.Household Appliance series:Dust Collector,Fan Lamp or LED,Sewing Machine etc.
4.Kitchen Appliance series:Microwave Oven,Fridge,Freezr,Coffemarker etc.
5.Industrial Equipment series:Shipping,Vehicle,Metalhalide lamp,Solor system,Wind power generation etc.
6.Electric filed series:TV,VCRS,Radio ect.


MODEL
                  DR-240-24
OUTPUT
DCVOLTAGE

24V

RATEDCURRENT

10A

CURRENTRANGE

0~10A

RATEDPOWER

240W

RIPPLE & NOISE (max.) Note.2

80MVP-P

VOLTAGEADJ.RANGE

24~28V

VOLTAGE TOLERANCE Note.3

±1.0%

LINEREGULATION

±0.5%

LOADREGULATION

±1.0%

SETUP.RISEHOLD.TIME

800ms,40ms/230VAC  800ms, 40ms/115VAC at full load

HOLD UP TIME (Typ.)

24ms/230VAC          24ms/115VAC at full load
INPUT
VOLTAGERANGE    Note.6

85 ~ 264VAC          120 ~ 370VDC

FREQUENCYRANGE

47~63HZ

POWER FACTOR (Typ.)

0.96/230VAC          0.99/115VAC at full load

EFFICIENCY (Typ.)

84%

AC CURRENT (Typ.)

2.8A/115VAC          1.4A/230VAC

INRUSH CURRENT (Typ.)

COLD START 27A/115VAC          45A/230VAC

LEAKAGE CURRENT

<3.5mA / 240VAC
PROTECTION
OVERLOAD

105~150%rated output power

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

30~36V

Protection type : Shut down o/p voltage, re-power on to recover

OVER TEMPERATURE

100±5 (TSW1) detect on heat sink of power transistor

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
WORKING TEMP

-10~+70 (refer to output load derating curve)

WORKINGHUMIDITY

20~90% RH non-condensing

STORAGE TEMP HUMIDITY

-20~+85, 10~95%RH

TEMPCOEFFICIENT

±0.03%(0~50)

VIBRATION

Component:10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
SAFETY&EMC
Note 4)

SAFETY  STANDARDS

UL508, UL60950-1, TUV EN60950-1 approved

WITHSTAND VOLTAGE

I/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC

ISOLATIONRESISTANCE

I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC

EMI CONDUCTICN&

RADIATION

Compliance to EN55011, EN55022(CISPR22)classB

HARMONICCURRENT

Compliance to EN61000-3-2,-3

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
QTHERS
MTBF

105.5Khrs min MIL-HDBK-217F(25)

DIMENSION

125.5*125.2*100mm(L*W*H)

PACKING

1.2Kg; 12pcs / 15.5Kg / 1.29CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details

Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.

SE-600-5 5V 100A 500w High Switch Power Supply

Learn More

S-200-5 High Quality 1000W 24VDC SMPS Switching Power Supply

Learn More

S-150-24 High Quality 150W 24VDC SMPS Switching Power Supply

Learn More