product

 Home » Products » Switching power supply » S-50-24 50W 24V Output Single Output Switching Power Supply

S-50-24 50W 24V Output Single Output Switching Power Supply

• AC input range selectable by switch
• Protections: Short circuit/ Overload
• Cooling by free air convection
• 100% full load burn-in test
• Low cost, hogh reliability
• 1 year warranty

Model


Specification
S-50-5 S-50-12 S-50-15 S-50-24
DC output voltage 5V 12V 15V 24V
Output voltage error (Note2) ±2% ±1% ±1% ±1%
Rated output current 10A 4.2A 3.4A 2.1A
Output current rage 0-10A 0-4.2A 0-3.4A 0-2.1A
Wave and noise(Note3) 75mVp-p 100mVp-p 100mVp-p 100mVp-p
Inlet stability(Note4) ±0.5% ±0.5% ±0.5% ±0.5%
Load stability(Note5) ±1% ±0.5% ±0.5% ±0.5%
DC output power 50W 50.4W 50.4W 50.4W
Efficiency 71% 78% 78% 82%
Adjustable range for DC voltage ±10,-5% ±10% ±10% ±10%
AC input voltage range 85∼132VAC/170∼264VACselected by switch
Input current 1.3A/115V 0.65A/230V
AC impulse current Cold-start current 18A/115V 36A/230V
Leakage current <0.5mA/240VAC
Overload protection 105%∼150%TypeTOLDBACK Reset: auto recovery
Over-voltage protection  
High-temperature protection  
Temperature coefficient ±0.03%(0∼50)
Setup rise hold up time 200ms,100ms,30ms
Vibration 10∼500Hz,2G 10min./1cycle,Period for 60min,Each axes
Withstand voltage Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms
Working temperature and humidity -10∼+60,20%∼90%RH
Store temperature and humidity -20∼+85,10%∼95RH
Overall dimension 159*97*38mm
Weight 0.5Kgs
Safety standards Meet UL1012
EMC standards  
Note:1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2311must be knocked down.

Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.

S-1000-12 High Quality 1000W 12VDC SMPS Switching Power Supply

Learn More

S-200-5 High Quality 1000W 24VDC SMPS Switching Power Supply

Learn More

Mini Size 24V 2.5A 60W Ms-60-24 AC to DC 110V/220V Transformer SMPS Switch Power Supply

Learn More