BF1 Series 10-28mm Aluminum Alloy Full Encoder Coupling - OD55mm* L78mm
With one hole diameter measuring 10mm and the opposite hole diameter measuring 28mm, this full encoder coupling is the reliable and economic solution for the connection of shafts, allowing for the transmission of power. This critical connector piece features a durable aluminum construction offering resistance to wear and tear and reliable, long-term performance. This particular coupling features an outer diameter of 55mm and a length of 78mm.
online service
◆Features:
Fail-safe — will still perform if elastomer fails
No metal to metal contact
Resistant to oil, dirt, sand, moisture and grease
More than 850,000 combinations of bore sizes
Most types available from stock in 24 hours
The Jaw Type couplings from YUMO are offered in the industry’s largest variety of stock bore/keyway combinations. These couplings require no lubrication and provide highly reliable service for light, medium, and heavy duty electrical motor and internal combustion power transmission applications.
◆Applications:
Include power transmission to industrial equipment such as pumps, gear boxes, compressors, blowers, mixers, and conveyors.YUMO’s Jaw Type couplings are available in 24 sizes from a minimum torque rating of 3.5 in–lbs (0.4 Nm) to a maximum torque rating of 170,004 in–lbs (19209 Nm) and a bore range of .125 inches (4.45mm) to 7 inches (178mm). Lovejoy’s standard bore program covers AGMA, SAE, and DIN bore/keyway and spline bore combinations.
YUMO Jaw Type couplings generally consist of two hubs (available in sintered metal, aluminum, bronze, steel, stainless steel, and ductile iron), and an elastomer element, known as a spider or cushion (materials available include NBR SOX rubber, Urethane, Hytrel, and Bronze).
Welcome to our website! Please send your words at any time in the following form and ask us, we will contact you and provide you with the corresponding service as soon as possible. Please write in English.
LB DB Bellows encoder flexible coupling screw stepper servo motor torque couplings
Oldham coupling consists of two half-open on the end face of the coupling groove and a disc with protruding teeth on both sides of the intermediate composition. Protruding teeth can be due to the slide in the groove, it can compensate for installation and operation when the relative displacement between the two shafts.
Learn More
LB Series Metal Bellows Clamping Flexible Coupling
A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of shafts during operation, however there are torque limiting couplings which can slip or disconnect when some torque limit is exceeded.
Learn More
Oldham flexible coupling large torque screw stepper servo motor coupling
Oldham coupling consists of two half-open on the end face of the coupling groove and a disc with protruding teeth on both sides of the intermediate composition. Protruding teeth can be due to the slide in the groove, it can compensate for installation and operation when the relative displacement between the two shafts.
Learn More
Single Disc LD2 encoder coupling
introduction
Flexible couplings are offered in the industrys largest variety of stock bore/keyway combinations. These couplings require no lubrication and provide highly reliable service for light, medium, and heavy duty electrical motor and internal combustion power transmission applications. Applications include power transmission to industrial equipment such as pumps, gear boxes, compressors, blowers, mixers, and conveyors.