E3X-D11-N Fiber Optic Amplifier

Voltage

Red light-emitting diode(660nm)

light source(ight-emitting wavelength)

DC12~24v±10%(P-P ) 10%LXT DC12~324v±lO%pulse(P-P)10% of the following

Control output NO/OFF output

50mA(NPN/PNP,1V),(NPN/PNP Power load 50mA(residual current voltage NPN/PNP, each of the following lV) open-collector output(NPN/PNP output ,according to the different forms)into the light when ON/ switch switch shade when ON

Protection of the loop

Power connection protection, output short-circuit protection features to prevent interference in each other

Response time

Ultra-high-speed mode (reset action:0.25ms)standard mode(reset action:1ms)ultra-long-range model (reset action:4ms)

Sensitivity settings

Teaching and procedures adjusting

indication lamp

Light said that the action(orange),7figures, saidthe amount of light(red),7 figures expressed as a percentage of theamount oflight(red), theam-ountoflight and bright dual-threshold level that Article (green, red color 2),7 digital threshold that (Red)

Time indicator

 Can usually/maintain peak/low to keep switching between the

 Direction indicator

 Usually/reverse switch

The use of environmental illumination

irradiation:incandescent: 10,OOOlx under the sun: 20,OOOlx following

Ambient temperature

Action: 1t03 connection -25~+45°C,4~11,when connected -25~+50°C,12~16°C,when connected -25~+45°C,save time:-30~+70°C(but not ice pick, then open the case)

Environmental humidity

Work,save time:35~85%RH(but not to form water)

Insulation resistance

20MΩ  (DC500V) 20MΩ above (DC500V)

Voltage

ACl,OOOV 50/60Hz 1min

Vibration(durable)

10~55Hz double amplitudel.5mm X,Y,Z direction of the 2h

The impact of(durable)

 50m/s2 X,Y,Z direction of the 2h

Lead-wire(standard wire length 2m)

Weight(packed state)

100g

Materials

Shell

PB-II of salt

Theprotective shield

Polyester

Accessories

Manual